How To Make a Tassel With Yarn

tassel

Materials
Cardboard
Ruler
Yarn
Scissors
Yarn needle

Note: This page is a free tutorial for the tassel only. You can find the free pattern for the entire scarf pictured above HERE.

Step 1: Cut two 24 inch pieces of yarn. Put them aside.

Step 2: Cut a piece of cardboard an inch taller than the height that you would like your finished tassel to be. I made my cardboard 5 inches tall.

Step 3: Take the rest of your yarn and wrap it around the cardboard 30 times. You can adjust this number, depending on how thick you want your tassel. The amount of yarn you need will depend on the size and thickness that you want to end up with. I needed about 25 feet of yarn for my tassel. Cut the yarn off at the bottom of the piece of cardboard, after your last wrap.

img_4489

Step 4: Place one of the 24 inch pieces of yarn under the top edge of the wrapped string and tie a knot.

img_4508

Step 5: Cut the wrapped yarn along the bottom of the cardboard. Remove the cardboard, being careful to hold the yarn in relatively the same position so that it does not get tangled. Tighten your knot if needed.

img_4491

img_4495

Step 6: Take the other 24 inch piece of yarn and tie a knot around the tassel, about a 3/4 inch below the top of the tassel. Wrap the yarn around the knot about 6-8 times. Tie another knot. Pull the ends behind the wrapped yarn and into the tassel with a crochet hook or needle so that they become part of the tassel.img_4497

img_4499

img_4501

Step 7: Trim the ends of the strings so that they are all the same length.

img_4502

Step 8: Using the string at the top of the tassel, attach it to whatever you have created it for! If you want to hide any knots, you can wrap the string around a few times (similar to step 6). Use a yarn needle to insert any extra yarn ends into the tassel to hide them. And that’s it!

img_4503

Please follow & share!

Leave a Reply

Your email address will not be published. Required fields are marked *